Installation
MKG Series Gas Griddle
L25-055 Rev. 0 (05/12)
4
WARNING
If the appliance is equipped with a power cord and it is damaged, it must be replaced by a
MagiKitch’n Authorized Service and Parts (ASAP) company technician, or a similarly qualified
person in order to avoid a hazard. A replacement, oil resistant cord must be provided by the
manufacturer.
WARNING
The electrical connection used by this appliance must comply with local codes. If there are no
local codes that apply, refer to the National Electrical Code (NEC), ANSI/NFPA 70 for
installation in the US. In Canada, refer to CSA Standard C22.2 and local codes. In all other
cases
refer to local and national codes and re
ulations.
WARNING
This equipment must be installed so that the plug is accessible unless other means for
disconnection from the power supply (e.g. a circuit breaker) is provided.
WARNING
If your appliance uses line current, it is equipped with an oil proof, electrical supply cord with a
three-prong safety plug. This is to protect operators from electrical shock hazard in the event
of an equipment malfunction. DO NOT cut or remove the grounding (third) prong from this
plug; it should be plugged into a properly grounded three-prong receptacle.
CAUTION
Connecting the appliance to an electrical supply other than that indicated on the data plate.
may damage the appliance and void the warranty.
Figure 1
1. Installation
1.1. Checking Your New Griddle
Your new MagiKitch’n appliance has been carefully packed into one crate. Every effort has been made to
ensure that it is delivered to you in perfect condition. As you unpack your new appliance, inspect each of
the pieces for damage. If something is damaged, DO NOT sign the bill of lading. Contact the shipper
immediately; the shipper is only responsible for 15 days after delivery. Check the packing list enclosed
with your appliance to ensure that you have received all the parts to the appliance. If you are missing any
parts, contact the dealer from whom the appliance was purchased.
Locate the MagiKitch’n Model Number and Serial Number from the information plate on the inside wall,
see Figure 1. Write this information and the date the appliance was purchased on the front of this manual.
If you have completed the above
steps that are applicable to the appliance
you purchased, the appliance is now
ready to be installed. Although it may be
possible for you to install and set up your
new appliance, it is STRONGLY advised
that you have this done by qualified
service professionals. A qualified
professional will ensure that the
installation is safe and meets local
building and fire codes.
1.2. Electrical Connection(s)
It is advised that this appliance be
plugged into a wall receptacle that is
controlled by the ventilation control. This will prevent the appliance from being operated without the
ventilator on. A schematic is behind the front access panel. The power requirements are listed below.
North America International
Input Voltage 120 Vac 50/60 Hz 220,230, or 240 Vac 50/60 Hz
Current/Control 0.22 Amps 0.11 Amps
Electrical Requirements
(19 pages)
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels